The continuous microwave heating system is designed for efficient heating of stone granulate to temperatures of up to 200 °C. The system features five 6 kW microwave generators with individually tunable applicators to maximize energy transfer into the material.

The continuous microwave heating system is designed for efficient heating of stone granulate to temperatures of up to 200 °C. The system features five 6 kW microwave generators with individually tunable applicators to maximize energy transfer into the material.

Continuous flow system with 40 kW for gentle drying of insects such as black soldier flies or mealworms

Modular microwave tunnel for homogeneous pasteurization of packaged meat products

Modular microwave tunnel for homogeneous pasteurization of packaged mussels

Microwave pasteurization tunnel for homogeneous, selective and gentle heat treatment of ready meals

Microwave hybrid continuous dryer for fast and homogeneous drying of technical ceramics

Microwave continuous dryer for the selective and rapid drying of 17 different types of vegetarian animal feed

Continuous microwave heating system for homogeneous preheating of wood materials

Laboratory appliance for microwave freeze-drying of food under vacuum for shorter drying times

The continuous microwave heating system is designed for efficient heating of stone granulate to temperatures of up to 200 °C. The system features five 6 kW microwave generators with individually tunable applicators to maximize energy transfer into the material.

The laboratory scale microwave rotary tube pyrolysis system is designed for use as a semi-continuous microwave processing unit in the process chain for the pyrolytic purification of silicon granules from solar modules and other granular bulk materials at temperatures up to 1000 °C.

Microwave pyrolysis system for processing thick-walled CFRP components in a semi-continuous operation mode. Volumetric heating up to approx. 400 - 600 °C under inert atmospheres (e.g. N2, Ar, CO2).

Lab-scale microwave pyrolysis system for the conversion of biogenic feedstocks (e.g. microalgae, sewage sludge) into bio-oil, syngas, and biochar.

Laboratory device to increase energy and resource efficiency in the recycling of organically contaminated electronic waste (aluminum)

Oven for crustless bread

Laboratory Chamber Oven with 3400 W power via four 850 W magnetrons

Laboratory oven for drying/heat treatment of granulates

Microwave chamber dryer for heating mineral fibers with power control

Laboratory oven for various high-temperature applications up to 1200° C

Laboratory device for homogeneous heating of ceramic products (up to 1000 °C) in a single-mode applicator for precise detection of transition metals such as mercury.

Microwave laboratory oven for food and dairy products

3-stub tuner for 2.45 GHz for VSWR reduction, durable design

Robust and water-cooled isolator with output load VSWR protection for industrial heating and plasma processes

For industrial heating and plasma process applications with output load VSWR protection and highly efficient water cooling

Motorized 3-stub tuner for impedance matching in the 2400 - 2500 MHz frequency range

Integrated analyzer and tuner for automatic impedance matching in industrial applications

Autotuner for 2.45 GHz for automatic impedance matching in industrial applications

3-stub tuner for 2.45 GHz for VSWR reduction, robust and continuously adjustable

Waveguide corners with h-bend for 2450 MHz components

Waveguide corners with e-bend for 2450 MHz components

Robust amplifier for industrial heating and plasma processes with 6000 W output

Robust amplifier for industrial heating and plasma processes with 3000 W output

The BPA3kW is a 3 kW PFC series Switched Mode Power Supply (SMPS) for 2450 MHz industrial magnetron applications. 4.8 kV to 5.4 kV HVDC output, single phase 182– 260 VAC wide input range, digital control, PROFINET/EtherCAT/Modbus TCP, MIL-HDBK compliant and made in Germany.

The BPA3kW is a 3 kW PFC series Switched Mode Power Supply (SMPS) for 2450 MHz industrial magnetron applications. 4.8 kV to 5.4 kV HVDC output, single phase 182– 260 VAC wide input range, digital control, PROFINET/EtherCAT/Modbus TCP, MIL-HDBK compliant and made in Germany.

The BPAPFC1kWS is an air-cooled single-phase input, switched-mode power supply (SMPS) engineered for 2450 MHz magnetron applications. The system delivers tightly regulated high-voltage DC output with low ripple characteristics, ensuring stable magnetron operation and extended device lifetime.

The BPAPFC1.5kW is an air-cooled Switched-mode power supply for a 1.5 kW / 2.45 GHz magnetron. This power supply is designed for high reliability applications which includes power factor correction (PFC), and high frequency switching up to 100 kHz effectively minimizes output current ripple. The incorporation of fast overvoltage and overcurrent protection mechanisms, in addition to the standard protection features, contributes to an extended operational lifespan of the system.

The BPA1.5kW is an air-cooled Switched-mode power supply for a 1.5 kW / 2.45 GHz magnetron. This power supply is designed for high reliability applications, and high frequency switching up to 100 kHz effectively minimizes output current ripple. The incorporation of fast overvoltage and overcurrent protection mechanisms, in addition to the standard protection features, contributes to an extended operational lifespan of the system.

The BPA1kWS is a single phase 1 kW Switched Mode Power Supply (SMPS) for 2450 MHz industrial magnetron applications. 3.8 kV to 4.6 kV HVDC output, 203–630 VAC wide input range, digital control, PROFINET/EtherCAT/Modbus TCP, MIL-HDBK compliant and made in Germany.

The BPA1kW is a 1 kW Switched Mode Power Supply (SMPS) for 2450 MHz industrial magnetron applications. 3.8 kV to 4.6 kV HVDC output, 200–690 VAC wide input range, digital control, PROFINET/EtherCAT/Modbus TCP, MIL-HDBK compliant and made in Germany.

The BPA3kW is a 3 kW Switched Mode Power Supply (SMPS) for 2450 MHz industrial magnetron applications. 4.8 kV to 5.4 kV HVDC output, 200–690 VAC wide input range, digital control, PROFINET/EtherCAT/Modbus TCP, MIL-HDBK compliant and made in Germany.

The BPA2kW is a 2 kW Switched Mode Power Supply (SMPS) for 2450 MHz industrial magnetron applications. 3.8 kV to 4.2 kV HVDC output, 200–690 VAC wide input range, digital control, PROFINET/EtherCAT/Modbus TCP, MIL-HDBK compliant and made in Germany.

The FM microwave generator is an air- and water-cooled power supply unit for 10 kW / 2.45 GHz magnetrons. The power is infinitely variable from 1000 to 10 000 W. It is suitable for various magnetron heads and offers comprehensive protective functions for safe operation.

The FM microwave generator is an air-cooled power supply unit for 6 kW / 2.45 GHz magnetrons. The power is continuously adjustable from 600 to 6000 W. Thanks to the touch display and control via PLC or field bus interface, the device offers maximum user-friendliness and flexibility with low residual ripple.

Air-cooled 6 kW power supply unit for magnetrons with stable filament control, protection functions and flexible control options, ideal for plasma applications

Air-cooled 5 kW power supply for magnetrons with stable filament control, protection functions and flexible control options, ideal for plasma applications.

Air-cooled power supply unit for 3 kW magnetrons with stable filament control, extended protection functions and flexible control options

Air-cooled power supply unit for 2 kW magnetrons with regulated power and safety functions

Air-cooled power supply unit for 3 kW magnetrons with stable filament control and extended protection functions

Air-cooled power supply unit for 2 kW magnetrons with regulated power and safety functions

Air-cooled power supply unit for 3 kW magnetrons with precise power control and extended protection functions

Air-cooled power supply unit for 2 kW magnetrons with stable filament control and extended protection functions

Compact 500 W solid-state microwave generator for industrial heating and plasma processes with advanced protection and continuous operation.

Water-cooled solid-state microwave generator with 250 W output power and high efficiency.

The new generation of signal generators is designed for solid-state generators in industrial heating and plasma processes.

With our Power Control Unit (PCU), four solid-state microwave generators (2450 MHz), each with an output power of 500 W, can be easily connected to applicators.

Compact solid-state microwave generator with precise power control and pulse operation

Compact solid-state microwave generator with precise power control and versatile operating modes

The Power Detector FM‑PD2CH2450S-PN is designed for industrial drying and heating applications, as well as for research use in laboratory environments.

Waveguide-Based RF Power Measurement System (2.4–2.5 GHz)

The modern FM-LTF leak detector (for 915 MHz) is the ideal tool for detecting microwave fields.

The modern FM-LTG leakage meter (for 2450 MHz) is the ideal tool for detecting microwave fields.

The modern FM-LTFG leakage meter (for 915 MHz and 2450 MHz) is the ideal tool for detecting microwave fields.

RF power measurement system for precise measurement of forward and reverse power in the 2400 - 2500 MHz range

Power detector for industrial and research applications in the frequency range from 900 - 930 MHz or 2400 - 2500 MHz

Power detector for industrial drying and heating processes in the frequency range of 2400 - 2500 MHz

Plasmajet 100 kW / 915 MHz

Microwave Plasma Source 5 kW / 915 MHz

Plasmajet 60 kW / 915 MHz

Plasma-enhanced chemical vapor deposition PECVD 24 kW

Plasmajet 6 kW

Plasmajet 10 kW

Compact LC-COM generator series with integrated power control, 300 W to 1 kW output

Robust LC-GEN generators with pulse frequency 50/60 Hz and 300 W to 3 kW output

Robust LC-GEN generators with up to 2 kW output and separate design

PH-GEN power supply unit for magnetron supply with infinitely variable power setting and monitoring